New Boilers Fully Fitted from £1,299 with Immediate Installation and a FREE Gas Safety Certificate
Magnetic system filter fitted to heating pipework in Speke

Serving Speke & Merseyside

Boiler Installation and Heating Engineers in Speke

Speke is close to our Tarbock Green base. New boilers fully fitted from £1,299, immediate installation available, a FREE Gas Safety Certificate on every install, and a fixed written price agreed before any work starts.

Gas Safe registered business: registration no. 576059, licence no. 3715984

Gas Safe registered

Registration no. 576059 · licence no. 3715984

Fixed written prices

Agreed before work starts, no hourly rates

Boilers from £1,299

Fully fitted, immediate installation available

FREE Gas Safety Certificate

With every new boiler installation

Open 7 days

Mon–Sun, 8:30am–5:30pm

Local coverage

Heating Engineers Who Actually Work in Speke

Speke was largely built as a planned estate from the 1930s through the 1950s to rehouse Liverpool families, and that housing still forms the backbone of the area today, alongside the industrial estates along Speke Boulevard and the airport that sits on the edge of the community. We fit, repair and certify heating throughout Speke and the neighbouring streets towards Hale Road and Hunts Cross.

We are based at 25 Bardley Cres, Tarbock Green, Liverpool L35 1RJ, only a short drive from Speke, which keeps a genuine same-day or next-day slot realistic rather than a promise that slips once a job is booked in.

Speke's core housing stock is 1930s to 1950s estate-built semis and terraces, laid out in the wide, tree-lined roads typical of that era's planned communities. Many of these properties still run heating systems that have been replaced once or twice since the original build, and a fair number retain a cylinder and loft tanks that are strong candidates for a conventional-to-combi conversion, provided the incoming mains can supply the flow a combi needs.

Regeneration has changed parts of Speke significantly over the past two decades, with newer housing developments replacing some of the oldest and most worn estate stock. These newer homes are better insulated and more airtight, which changes what correctly sized heating actually looks like: an oversized boiler will short-cycle and waste gas rather than heat the house any faster, so we size against the property's real heat loss rather than assume a standard output suits every job.

Speke Boulevard and the surrounding industrial estates bring a different kind of enquiry: commercial units and the residential streets nearby with landlords and business tenants needing gas safety inspections and certification kept current, particularly with Liverpool John Lennon Airport close by and a working population moving through the area. Hale Road and the streets towards Hunts Cross carry a slightly older mix, including some larger inter-war semis with higher heat demand and more radiators to balance.

We install and repair Worcester Bosch, Vaillant, Baxi and Heatline boilers across Speke, and we recommend the appliance on the basis of the property and hot-water demand in front of us, not a standard price list. A three-bedroom estate semi near Speke Hall Avenue does not need the same boiler as a larger inter-war semi towards Hunts Cross, and pricing them the same is how households end up with an appliance that does not suit the house.

Speke has a significant rental market, including housing association and privately let stock, and landlords here need a valid CP12 gas safety certificate in place before a tenancy starts and renewed every year. We work with Speke landlords and letting agents on inspections, certification and boiler replacement between tenancies, and appointments are booked within our published hours of Mon–Sun, 8:30am–5:30pm, seven days a week.

Property types we work on in Speke

  • 1930s to 1950s estate semis and terraces

    The bulk of Speke's original planned housing. Many still run a cylinder and loft tanks from an earlier system upgrade, making them good candidates for a combi conversion once mains flow rate has been checked.

  • Newer regeneration housing

    Built to replace worn estate stock over the past two decades, these homes are better insulated and more airtight. Correct boiler sizing against real heat loss matters more here than raw kilowatts, to avoid short-cycling and wasted gas.

  • Larger inter-war semis towards Hale Road and Hunts Cross

    Higher heat demand, more radiators and in some cases two bathrooms, where a system boiler and cylinder can still outperform a combi. We advise which suits the property rather than defaulting to one appliance type.

  • Rented housing association and private lets

    A significant share of Speke's housing, with landlords needing valid CP12 certificates in place before and throughout a tenancy. We work with landlords and agents on inspection and certification cycles across the estate.

What we do here

Services Available in Speke

Heating

Boilers

Gas Safety

Why us

Why Choose Harrison E Jones Heating in Speke

Minutes from Tarbock Green, not a national call centre

Our base at 25 Bardley Cres, Tarbock Green, L35 1RJ is a short drive from Speke, which is why turnaround times are realistic and an engineer can return quickly if a part is needed.

Gas Safe registered, and you can check it

Registration no. 576059, licence no. 3715984. Ask to see the card at the door before any gas appliance is touched in your Speke home.

A fixed written price before work starts

You are given a fixed price in writing before an engineer picks up a tool. If old pipework in an estate semi turns up something unexpected, we stop and agree the cost with you before continuing.

New boilers fully fitted from £1,299

That figure covers the installation, not just the appliance, and every new boiler installation includes a FREE Gas Safety Certificate. Immediate installation is available across Speke where the survey allows.

Brands we fit every week

Worcester Bosch, Vaillant, Baxi and Heatline. Fitting a small group of well-supported brands means faster parts availability and fewer return visits than chasing whatever is cheapest that month.

Local issues

Heating Problems We See Most Often in Speke

Ageing pipework in original estate housing

Speke's 1930s to 1950s semis carry decades of altered gas and heating pipework. Fitting a new condensing boiler onto an uncleaned system here without a proper flush and magnetic filter usually means blocked heat exchangers and cold radiators within a year or two.

Cylinders past their best

A good number of Speke properties still run the original cylinder-based system. It is slow to recover, wastes standing heat and parts for old controls are increasingly hard to source, which is why a combi conversion is usually the first thing worth pricing.

Oversized boilers on newer regeneration housing

Better-insulated newer Speke homes do not need the largest boiler on the price list. Fit one anyway and it short-cycles, wasting gas and shortening the appliance's own life. Correct sizing against actual heat loss fixes this, not brand or spec sheets alone.

Mains flow limits on combi conversions

Older supply pipes in parts of Speke can restrict flow rate. A combi installed without testing this first gives weak showers and constant complaints, so we measure flow before recommending the conversion, not after fitting it.

Exposed pipework near the airport and Boulevard estates

Properties nearer Speke Boulevard and the airport take exposed winter weather harder. Undersized or poorly insulated external condensate pipework is the usual reason a sound boiler locks out on the coldest morning, and it is preventable at installation.

Our process

How a Job in Speke Runs, Step by Step

  1. 1

    Step 1: Inspection

    We look at the appliance, the pipework, the flue route and the property itself, and ask what the heating actually does badly. Nothing is quoted from a photo or a phone description alone.

  2. 2

    Step 2: Diagnosis and recommendation

    You get a plain explanation of the fault or the right appliance for the property, sized on bathrooms, radiator count and hot-water demand, plus the mains flow rate where a combi is being considered.

  3. 3

    Step 3: Fixed price in writing

    One price for the job, agreed before work starts. If something genuinely unexpected appears, we stop, explain it and agree the cost with you before continuing.

  4. 4

    Step 4: Installation or repair

    Dust sheets down, work carried out by a Gas Safe registered engineer, the system cleansed and protected where needed, and everything cleared away at the end.

  5. 5

    Step 5: Testing, certification and handover

    Combustion readings taken, the system balanced and tested, controls explained, manufacturer warranty registered on your behalf and your certification issued, including the FREE Gas Safety Certificate on a new boiler installation.

Questions

Speke Heating & Boiler FAQs

Do you cover Speke?

Yes. We are based at 25 Bardley Cres, Tarbock Green, L35 1RJ, a short drive from Speke. We cover the estate housing around Speke Hall Avenue, Speke Boulevard, Hale Road, the area near Liverpool John Lennon Airport and out towards Hunts Cross.

How quickly can you reach a Speke property?

Speke is close to our Tarbock Green base. We book within our published hours of Mon–Sun, 8:30am–5:30pm, and immediate boiler installation is available where the survey allows.

How much does a new boiler cost in Speke?

New boilers start from £1,299 fully fitted, with a FREE Gas Safety Certificate included on every installation. The exact figure depends on the boiler and the work your property needs, and you get a fixed price in writing before any work starts.

Can you convert my Speke property to a combi?

Often, yes. Many of Speke's original estate semis still run a cylinder and loft tanks, and converting frees the cupboard and loft space. The deciding factor is incoming mains flow rate, which we measure before recommending it.

Do you work on Speke's original 1930s to 1950s estate housing?

Yes, regularly. We know the common layout and pipework of Speke's original estate semis and terraces, and we cleanse the system before fitting a new boiler onto older pipework.

Will a new boiler suit newer regeneration housing in Speke?

Usually a smaller, correctly sized boiler rather than a large one. Newer, better-insulated Speke homes lose heat more slowly, so an oversized appliance will short-cycle, waste gas and wear out faster. We size against actual heat loss, not floor area alone.

Which boiler brands do you fit in Speke?

Worcester Bosch, Vaillant, Baxi and Heatline. We recommend the appliance on the basis of your property, bathrooms and hot-water demand rather than fitting one brand everywhere.

Do you provide landlord gas safety certificates in Speke?

Yes. We carry out landlord gas safety inspections and issue CP12 certificates for Speke properties, including estate semis, terraces and rented housing, with digital copies sent to landlord and agent.

Is there a call-out charge for a repair in Speke?

You get a fixed price for the work agreed in writing before it begins, not an hourly rate. Ring us with the fault or error code showing and we will talk you through how we price it.

Are you Gas Safe registered?

Yes: Harrison E Jones Heating is a Gas Safe registered business, registration no. 576059, licence no. 3715984. All gas work is carried out and certified to current regulations.

Speke and the Surrounding Liverpool Fringe

Speke sits close to our Tarbock Green base, and our coverage spreads from the original estate housing around Speke Hall Avenue through Speke Boulevard, Hale Road and out towards Hunts Cross, joining up with Halewood, Woolton and the wider Liverpool area we serve.

The area's mix of 1930s to 1950s planned estate housing, newer regeneration developments and a significant rented sector means most Speke heating jobs fall into patterns we already recognise, which is exactly why we can give an accurate fixed price early rather than hedging with an hourly rate.

For a new boiler fully fitted from £1,299 with a FREE Gas Safety Certificate, a heating repair, an annual service or a landlord CP12 anywhere in Speke, send the details through the quote form on this page or ring 07523 738285 to speak to a Gas Safe registered engineer directly.

Your next step

Get Your Fixed Price for Speke in Writing

Send the details and we'll come back with a clear price, or ring now if you're without heating or hot water.

  • Gas Safe registered no. 576059 · licence no. 3715984
  • 25 Bardley Cres, Tarbock Green, Liverpool L35 1RJ
  • 07523 738285 · 0151 384 5908
  • info@harrisonejonesheating.co.uk
  • Mon–Sun, 8:30am–5:30pm

Request your free fixed price

Takes under a minute. No pushy sales visit, no obligation.

Or call us direct on 07523 738285 · 0151 384 5908

Call NowFree Quote