New Boilers Fully Fitted from £1,299 with Immediate Installation and a FREE Gas Safety Certificate
Heating programmer set after a boiler installation in Wavertree

Serving Wavertree & Merseyside

Boiler Installation and Heating Engineers in Wavertree

New boilers fully fitted from £1,299, immediate installation available, a FREE Gas Safety Certificate on every install, and a fixed written price agreed before any work starts in Wavertree, Picton and Edge Hill.

Gas Safe registered business: registration no. 576059, licence no. 3715984

Gas Safe registered

Registration no. 576059 · licence no. 3715984

Fixed written prices

Agreed before work starts, no hourly rates

Boilers from £1,299

Fully fitted, immediate installation available

FREE Gas Safety Certificate

With every new boiler installation

Open 7 days

Mon–Sun, 8:30am–5:30pm

Local coverage

Heating Engineers Who Actually Work in Wavertree

Wavertree is a suburb of two very different halves: the dense Victorian terraces around Picton and Smithdown Road, heavily let to students and young professionals close to Edge Hill and Wavertree Technology Park, and the quieter planned streets of Wavertree Garden Suburb further out. We work across both regularly.

We work out of 25 Bardley Cres, Tarbock Green, Liverpool L35 1RJ, and Wavertree sits comfortably within our normal working area, close enough for a realistic same-day or next-day slot rather than a promise that slips.

The terraces around Picton, Wellington Road and Smithdown Road are classic Liverpool Victorian stock: solid brick walls, cellars in some streets, bay-fronted fronts and pipework that has been extended and patched by successive owners and landlords. A very large proportion of this housing is let, whether as single-family tenancies or as houses in multiple occupation close to Edge Hill and the university campuses, which changes the priorities on a job. Heavy, near-constant hot-water demand from several tenants puts more strain on a boiler than a single family household, and a landlord has a legal duty to hold a valid gas safety record for every appliance in the property before a tenancy can properly start.

Wavertree Garden Suburb, built in the early twentieth century as a planned model estate, is a different proposition again: characterful, low-density housing with wider gardens and a more consistent build quality than the tighter terraces nearer Smithdown Road. Boiler and radiator sizing here tends to follow more standard family-home patterns, though original features and layouts sometimes limit where a boiler can sensibly be relocated.

Wavertree Technology Park and the streets nearer Wavertree village bring a mix of older terraced housing alongside some newer infill development, and Old Swan and the boundary with Childwall add further inter-war semis into the mix. Across all of it, a large number of properties are still on original or ageing combi boilers that were fitted decades ago into a tight kitchen cupboard, and the flue and gas run often need re-checking against current standards before a straight swap.

We install and repair Worcester Bosch, Vaillant, Baxi and Heatline boilers throughout Wavertree, Picton, Smithdown Road, Edge Hill, Wavertree Technology Park and Old Swan, and we work regularly with landlords and letting agents on inspections, certificates and boiler replacement between tenancies.

Appointments are booked within our published hours of Mon–Sun, 8:30am–5:30pm, seven days a week, which suits landlords needing a certificate turned around before a new tenancy starts as much as families without heating over a weekend.

Property types we work on in Wavertree

  • Victorian terraces around Picton and Smithdown Road

    Solid brick walls, tight kitchens and pipework altered over decades. Heavy demand where let as HMOs, and flue and gas run checks are often needed before a straight boiler swap.

  • HMOs and student lets near Edge Hill

    Multiple tenants drawing hot water at different times of day, with a legal duty on the landlord to hold a valid gas safety record for every appliance. We work directly with landlords and letting agents on this.

  • Wavertree Garden Suburb family homes

    Planned, characterful housing with wider gardens and more consistent build quality. Standard family-home sizing applies, though original features can limit boiler relocation options.

  • Inter-war semis towards Old Swan and Childwall boundary

    Common candidates for combi conversion where an original cylinder is still in place, subject to confirming incoming mains flow rate.

What we do here

Services Available in Wavertree

Heating

Boilers

Gas Safety

Why us

Why Choose Harrison E Jones Heating in Wavertree

A short run from Tarbock Green

Our base at 25 Bardley Cres, Tarbock Green, L35 1RJ keeps Wavertree, Edge Hill and Smithdown Road within our normal working day.

Gas Safe registered, and you can check it

Registration no. 576059, licence no. 3715984. Ask to see the card at the door, whether you are a homeowner, tenant or letting agent.

A fixed written price before work starts

You get a price in writing before an engineer picks up a tool, useful for landlords who need an accurate figure for budgeting between tenancies.

New boilers fully fitted from £1,299

That figure covers the installation, not just the appliance, and every new boiler installation includes a FREE Gas Safety Certificate. Immediate installation is available where the survey allows.

Experience with HMOs and landlord compliance

We regularly carry out gas safety inspections and CP12 certificates for Wavertree landlords and letting agents managing multiple properties near Edge Hill and the technology park.

Local issues

Heating Problems We See Most Often in Wavertree

Boilers overworked by HMO-level demand

A boiler sized for a single family struggles when three or four tenants each want hot water at different times of day. Undersized appliances in HMOs near Edge Hill are a common cause of complaints about lukewarm showers and long recovery times.

Missed or lapsed gas safety certificates

Landlords managing several Wavertree lets sometimes lose track of renewal dates. A lapsed certificate is a legal problem as well as a safety one, and we can set up straightforward annual reminders as part of ongoing servicing.

Old pipework in Smithdown Road and Picton terraces

Decades of tenancy changes and DIY alterations leave sludge and inconsistent pipe diameters behind. Fitting a new condensing boiler onto an uncleaned system here is a common cause of early breakdown.

Tight kitchen cupboards limiting appliance choice

Many terraces near Wavertree village have boilers squeezed into small kitchen cupboards from a previous era. Flue routing and clearances need checking properly before assuming a like-for-like swap will work.

Cylinders past their best in Old Swan semis

Older inter-war semis towards Old Swan often still run a cylinder-based system that is slow to recover and increasingly hard to source parts for, making a combi conversion worth pricing.

Our process

How a Job in Wavertree Runs, Step by Step

  1. 1

    Step 1: Inspection

    We look at the appliance, the pipework, the flue route and the property itself, and ask what the heating actually does badly. Nothing is quoted from a photo or a phone description alone.

  2. 2

    Step 2: Diagnosis and recommendation

    You get a plain explanation of the fault or the right appliance for the property, sized on bathrooms, radiator count and hot-water demand, plus the mains flow rate where a combi is being considered.

  3. 3

    Step 3: Fixed price in writing

    One price for the job, agreed before work starts. If something genuinely unexpected appears, we stop, explain it and agree the cost with you before continuing.

  4. 4

    Step 4: Installation or repair

    Dust sheets down, work carried out by a Gas Safe registered engineer, the system cleansed and protected where needed, and everything cleared away at the end.

  5. 5

    Step 5: Testing, certification and handover

    Combustion readings taken, the system balanced and tested, controls explained, manufacturer warranty registered on your behalf and your certification issued, including the FREE Gas Safety Certificate on a new boiler installation.

Questions

Wavertree Heating & Boiler FAQs

Do you cover Wavertree?

Yes. Wavertree, Picton, Smithdown Road, Edge Hill, Wavertree Technology Park and Old Swan all sit within our regular working area from Tarbock Green, L35 1RJ.

How much does a new boiler cost in Wavertree?

New boilers start from £1,299 fully fitted, and every installation includes a FREE Gas Safety Certificate. HMOs and multi-let properties may need a higher-output appliance, which affects the final figure, so we give a fixed price in writing before starting.

Do you provide gas safety certificates for HMOs near Edge Hill?

Yes. We carry out landlord gas safety inspections and issue CP12 certificates for HMOs and student lets, and work directly with letting agents managing several Wavertree properties.

Will a standard boiler cope with an HMO in Wavertree?

Not always. Several tenants drawing hot water at different times can overwhelm a boiler sized for a single family. We assess actual demand and recommend an appliance that can genuinely cope.

Can you convert my Old Swan or Wavertree cylinder system to a combi?

Often, yes, where an existing cylinder is in place. The deciding factor is incoming mains flow rate, which we measure before recommending the conversion.

Which boiler brands do you fit in Wavertree?

Worcester Bosch, Vaillant, Baxi and Heatline. We recommend the appliance on the basis of your property and hot-water demand.

Can you fit a boiler in a Wavertree Garden Suburb home?

Yes. These are characterful, low-density family homes where standard sizing usually applies, though we check original layout and features before recommending a boiler position.

Is there a call-out charge for a repair in Wavertree?

You get a fixed price for the work agreed in writing before it begins, not an hourly rate. Ring us with the fault or error code showing and we will explain how we price it.

Do you work weekends in Wavertree?

Yes: our hours are Mon–Sun, 8:30am–5:30pm, seven days a week, which suits landlords managing tenants as much as households working during the week.

Are you Gas Safe registered?

Yes: Harrison E Jones Heating is a Gas Safe registered business, registration no. 576059, licence no. 3715984. All gas work is carried out and certified to current regulations.

Heating Coverage Across Wavertree and Edge Hill

Wavertree sits within easy reach of our Tarbock Green base, and our coverage runs from Picton and Smithdown Road through Edge Hill and Wavertree Technology Park to Wavertree Garden Suburb and Old Swan.

The mix of dense Victorian terraces, heavy student and HMO letting, and quieter planned family housing means we quote each Wavertree property on its actual demand and tenancy pattern rather than a single standard figure.

For a new boiler fully fitted from £1,299 with a FREE Gas Safety Certificate, a heating repair, an annual service or a landlord CP12 anywhere in Wavertree or Edge Hill, send the details through the quote form on this page or ring 07523 738285 to speak to a Gas Safe registered engineer directly.

Your next step

Get Your Fixed Price for Wavertree in Writing

Send the details and we'll come back with a clear price, or ring now if you're without heating or hot water.

  • Gas Safe registered no. 576059 · licence no. 3715984
  • 25 Bardley Cres, Tarbock Green, Liverpool L35 1RJ
  • 07523 738285 · 0151 384 5908
  • info@harrisonejonesheating.co.uk
  • Mon–Sun, 8:30am–5:30pm

Request your free fixed price

Takes under a minute. No pushy sales visit, no obligation.

Or call us direct on 07523 738285 · 0151 384 5908

Call NowFree Quote